上海荣计达仪器科技有限公司

咨询电话:137-6111-8616


数显砂浆稠度仪 砂浆稠度测定仪

数显砂浆稠度仪是用一定几何形状和重量的标准圆锥体以其自身的重量自由地沉入砂浆混合物中沉度的厘米数来表示。适用于确定配合比或施工过程中控制砂浆的稠度,以达到控制用水量的目的。

  • 型号: SC-145

  • 产品参数
  • 型号: SC-145

数显砂浆稠度仪是我公司依照JGJ70-2009建筑砂浆基本性能试验方法设计制造,用来测定砂浆的流动性稠度。数显砂浆稠度仪数显标尺,数据直观,数显标尺在任意位置可调零,使用方便。数显砂浆稠度仪是用一定几何形状和重量的标准圆锥体以其自身的重量自由地沉入砂浆混合物中沉度的厘米数来表示。适用于确定配合比或施工过程中控制砂浆的稠度,以达到控制用水量的目的。

Digital mortar consistency meter is designed and manufactured by our company in accordance with JGJ70-2009 basic performance test method of building mortar, which is used to measure the fluidity consistency of mortar. Digital mortar scale digital display scale, intuitive data, digital display scale can be adjusted to zero at any position, easy to use. The digital display mortar consistency meter uses a standard cone of a certain geometric shape and weight to freely sink into the mortar mixture by its own weight. It is suitable for determining the mix ratio or controlling the consistency of the mortar during construction to achieve the purpose of controlling water consumption.


数显砂浆稠度仪参数:

★测量范围:

沉入深度: 0—14.5厘米

沉入体积: 0—229.3厘米3

★A小刻度值(沉入深度):1毫米

★锥体几何参数:

圆锥角:30°

高度:145毫米

底直径:75毫米

★锥体与刻度尺合重:300±2克

★外形尺寸:350×300×800毫米

★重量:≈20公斤

SC-145 Digital Mortar Consistency Tester Parameters

★ Measuring range:

Sinking depth: 0—14.5 cm

Sinking volume: 0-229.3 cm 3

★ A small scale value (immersion depth): 1 mm

★ Cone geometry parameters:

Cone angle: 30 °

Height: 145 mm

Bottom diameter: 75 mm

★ Total weight of cone and scale: 300 ± 2g

★ Dimensions: 350 × 300 × 800 mm

★ Weight: ≈20 kg


数显砂浆稠度仪使用方法:

★将搅拌好的试验用砂浆放入锥形盛料容器内。

★提起刻度尺,将横臂下降至适当位置(必须使刻度尺有足够下沉长度),让锥体A与容器内的砂浆混合物表面上端面正好接触,将数显标尺调零。

★松开刻度尺,让标准锥体以其自身重量沉入砂浆混合物中。

★待标准锥体不再往砂浆中沉入时,此时可以直接从数显标尺上读出所测的沉入深度。

SC-145 Digital Mortar Consistency Meter:

★ Put the stirred test mortar into the conical container.

★ Lift the scale and lower the cross arm to an appropriate position (the scale must have a sufficient sinking length), so that the cone A is in direct contact with the upper end surface of the mortar mixture surface in the container, and the digital display scale is zeroed.

★ Release the scale and let the standard cone sink into the mortar mixture with its own weight.

★ When the standard cone no longer sinks into the mortar, the measured sinking depth can be read directly from the digital scale at this time.


数显砂浆稠度仪维护保养:

★标准试锥存放或使用时,应注意严加保护,不得碰伤标准锥体的外锥面和锥体A。

★试验完毕后,仪器应清洗干净,并涂上防锈脂。

★仪器不用时加罩保存。

SC-145 Digital Mortar Consistency Meter Maintenance:

★ When the standard test cone is stored or used, care should be taken to prevent it from hitting the outer cone surface and cone A of the standard cone.

★ After the test, the instrument should be cleaned and coated with anti-rust grease.

★ Store the instrument when not in use.


数显砂浆稠度仪 砂浆稠度测定仪
数显砂浆稠度仪是用一定几何形状和重量的标准圆锥体以其自身的重量自由地沉入砂浆混合物中沉度的厘米数来表示。适用于确定配合比或施工过程中控制砂浆的稠度,以达到控制用水量的目的。
长按识别二维码查看详情
长按图片保存/分享

数显砂浆稠度仪 砂浆稠度测定仪

询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

扫一扫关注我们

Copyright @ 2018 上海荣计达仪器科技有限公司.All Rights Reserved   沪ICP备11009963号-4     

Copyright @ VillaGrandis All Rights Reserved某某某有限公司版权所有        

ICP备案号180006020号-3

 

客服中心
热线电话
13761118616
上班时间
周一到周日
二维码