上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

全自动混凝土压力试验机,电脑全自动恒应力压力试验机

全自动混凝土压力试验机是**检测仪器,用于测定砖、石、砼等建筑材料的抗压强度。使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

  • 型号: DYE-2000S

  • 产品参数
  • 型号: DYE-2000S

 

 

全自动混凝土压力试验机**检测仪器,用于测定砖、石、砼等建筑材料的抗压强度。使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

Full-automatic concrete pressure testing machine is a testing instrument used to determine the compressive strength of building materials such as brick, stone, and concrete. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

全自动混凝土压力试验机符合**标准《普通混凝土力学性能实验方法标准》,自动控制加载速度,并具有加荷速度显示窗口、峰值保持、过载保护功能,由上海荣计达仪器科技有限公司提供,设备质保期一年,一年内产品如有质量问题,供方负责免费维修。如果因操作不当或者人为损坏,我公司亦应提供维修、更换服务,由此产生的费用我公司会酌情收取

Fully-automatic concrete pressure testing machine conforms to the ** standard "Standard for Experimental Methods of Mechanical Performance of Common Concrete", automatically controls the loading speed, and has a loading speed display window, peak hold, and overload protection functions. Provided by Shanghai Rongjida Instrument Technology Co., Ltd. The equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged as appropriate.

 

全自动混凝土压力试验机动调节上下压板间距,液压加荷有微机显示计算储存功能打印数据报告。大大降低了故障率。采用进口比例阀,稳定性高,加荷速度平稳。

The automatic concrete pressure testing machine is to manually adjust the distance between the upper and lower pressure plates, and the hydraulic loading has a microcomputer display calculation and storage function to print data reports. Greatly reduced the failure rate. Imported proportional valve, high stability and stable loading speed.

 

全自动混凝土压力试验机技术参数:

★大载荷:2000kN

★示值准确度:一级

★分辨值:0.1kN

★承压板间大距离:320mm

★上下压力板规格:250×220mm

★活塞直径*大行程:直径250×30mm

★电机功率:0.75KW

★输入电压: 380V

★外型尺寸: 880×480×1400mm

★净重: 850kg

Technical parameters of automatic concrete pressure testing machine

★ Large load: 2000kN

★ Accuracy of displayed value: first level

★ Resolution: 0.1kN

★ Large distance between pressure plates: 320mm

★ Upper and lower pressure plate specifications: 250 × 220mm

★ Piston diameter * large stroke: 250 × 30mm diameter

★ Motor power: 0.75KW

★ Input voltage: 380V

★ External dimensions: 880 × 480 × 1400mm

★ Net weight: 850kg

 

全自动混凝土压力试验机使用与操作注意事项:

★ 使用前应先检查油箱内的油液是否充足,可察看右侧面油标,如不足,则应打开后箱板向油箱内添加之,至液面在油标处为宜。

★检查各油灌接头和紧固件是否松动,如有松动则拧紧之。检查防尘罩应完整无损。检查电气接地、保险熔丝等安全防护措施是否有效。

一次使用时,应先将回油阀打开,关闭回油阀,接通电源,按下启动按钮,油泵开始工作,然后关闭回油阀,徐徐打开送不油阀,活塞上升一段距离,有无卡住等现象。如有,则应卸荷、停机检查,并排除之。打开回油阀,活塞则下降到原位。

★ 将试件表面擦拭干净,检查外观有无明显缺陷,如有能影响试验数值者,须更换无损试件。

★按试件下压板定位线框放在下压板正中,并按试件大小,转动手轮和丝杠,调节上压板至适当位置。

★接通测控系统电源(开关在测控箱背后),按操作步骤进行清零以及时钟修改等各有关数据的输入。

★按下启动按钮,关闭回油阀,调控送油阀,按需要速率平稳进行加荷试验,及至试件被压碎,负荷下降。随即打开回油阀,使油液迅速流回油箱。

★试验结束时,按面板上“打印”键。打印机即可打印输出该次的试验报告。

★ 操作时,下压板上升高度不得超过4cm(或立柱上标志线),以免发生意外。

★ 操作中禁止手等人体任何部分置于上下压板之间,并注意试件在破碎时碎片崩出伤人。

★试后随即清除破碎试块,以待下次试验。当不再做试验时,要打开回油阀,关闭送油阀,切断电源。

Precautions for use and operation of automatic concrete pressure testing machine

★ Before use, check whether the oil in the fuel tank is sufficient. You can check the oil level on the right side. If it is insufficient, you should open the rear tank plate and add it to the fuel tank.

★ Check whether the oil fittings and fasteners are loose, and tighten them if they are loose. Check that the dust cover is intact. Check whether the safety protection measures such as electrical grounding and fuse are effective.

★ When used once, the oil return valve should be opened, closed, and the power should be turned on. Press the start button to start the oil pump, then close the oil return valve, slowly open the oil delivery valve, and the piston rises a distance. No jams and so on. If there is, it should be unloaded, stopped and checked, and excluded. Open the oil return valve and the piston descends to its original position.

★ Wipe the surface of the test piece clean and check for obvious defects in the appearance. If it can affect the test value, replace the non-destructive test piece.

★ Position the wire frame of the lower plate of the test piece in the middle of the lower plate. According to the size of the test piece, turn the handwheel and the screw to adjust the upper plate to the proper position.

★ Turn on the power of the measurement and control system (the switch is on the back of the measurement and control box), and follow the operation steps to clear the data and modify the clock.

★ Press the start button, close the oil return valve, regulate the oil delivery valve, and perform the loading test smoothly at the required rate until the test piece is crushed and the load is reduced. The oil return valve is then opened, allowing the oil to quickly flow back to the tank.

★ At the end of the test, press the "Print" key on the panel. The printer can print out the test report.

★ During operation, the height of the lower platen must not exceed 4cm (or the marking line on the column) to avoid accidents.

★ It is forbidden to place any part of the human body, such as hands, between the upper and lower pressure plates during operation, and pay attention to the fragmentation of the test piece when it is broken to hurt people.

★ After the test, the broken test block is cleared for the next test. When no longer doing the test, open the oil return valve, close the oil supply valve, and cut off the power.


全自动混凝土压力试验机,电脑全自动恒应力压力试验机

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

全自动混凝土压力试验机,电脑全自动恒应力压力试验机

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号