上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

防水卷材拉伸试验机,油毡拉力试验机, 砂浆拉力试验机

防水卷材拉伸试验机适用于各种防水卷材、涂料.橡胶、编织物及小截面金属细丝。也可用于符合本试验机条件时的其它试验,使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

  • 型号: DL-5000

  • 产品参数
  • 型号: DL-5000

防水卷材试验机适用于各种防水卷材、涂料.橡胶、编织物及小截面金属细丝。也可用于符合本试验机条件时的其它试验,使用前务必仔细阅读说明书。并由**实验人员操作,以避免操作不当引起的伤害。如需了解更多资料请与我公司客服人员联系。

Waterproof coil tensile tester is suitable for various waterproof coils, coatings, rubbers, braids and small cross-section metal filaments. It can also be used for other tests that meet the conditions of this testing machine. Please read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.

 

防水卷材试验机由上海荣计达仪器科技有限公司提供,参照《GB/T328-2007系列》相关标准设计制造,具有造型美观,设计合理,性能稳定,结构紧凑操作方便优点。

The waterproof coil tensile testing machine is provided by Shanghai Rongjida Instrument Technology Co., Ltd. It is designed and manufactured in accordance with the relevant standards of "GB / T328-2007 Series".

 

防水卷材试验机技术参数

★大试验力:5000N

★试验力有效测量范围:80N—2000N

★试验力小分辨力:1N

★拉伸夹具间A大距离:800mm

★试验速度:2-500mm 可调

★电源:220V±10%

Technical parameters of waterproof coil tensile tester:

★ Large test force: 5000N

★ Effective measurement range of test force: 80N—2000N

★ small test force resolution: 1N

★ A large distance between stretching fixtures: 800mm

★ Test speed: 2-500mm adjustable

★ Power supply: 220V ± 10%

 

防水卷材试验机结构

★本试验机由底座、箱体立柱、夹头、丝杠、轨道、电子测力系统、位移测量系统等零部件组成。

★机械加荷系统由下箱体内减速箱及丝杠组成。

★夹头由支架、压板、支柱、轧片、弹簧等主要零件组成,上夹头与测力体相连,通过它所夹持的试件向上运动实现测力传递。

Structure of waterproof coil tensile tester

★ This testing machine consists of base, box post, chuck, lead screw, rail, electronic force measurement system, displacement measurement system and other components.

★ The mechanical loading system is composed of a reduction box and a screw in the lower box.

★ The chuck is composed of the main parts such as bracket, pressure plate, pillar, rolled sheet, spring, etc. The upper chuck is connected with the force measuring body, and the force transmission is achieved by the upward movement of the specimen held by it.

 

防水卷材试验机安装:

本试验机整台装箱出厂,安装时应预先打好砼底座,高度应和本机相配,方便操作为宜,也可向本厂订做底柜。本机设置应找水平,否则对拉力数值有影响,本机底部有四个底脚螺栓用以调整水平,接好地线即可使用。

Installation of waterproof coil tensile tester:

The whole test machine is packed in a box before leaving the factory. The base should be pre-dipped during installation. The height should be matched with the machine for convenient operation. The base cabinet can also be customized from the factory. The level of this machine should be set, otherwise it will affect the tension value. There are four foot bolts on the bottom of the machine to adjust the level, and the ground wire can be used.

 

防水卷材试验机调试与使用:

夹头位置调整:

1、按面板上的上升按键,同时面板上状态指示灯红灯亮,相应速度档位指示灯开始闪烁,液晶屏上状态显示位置:上升,同时实时显示力值和移值,如果到达力值或位移的A大限制值,自动停机,同时液晶屏状态位置显示满载或限位.

2、按面板上的下降按键,同时面板上的状态指示灯绿灯亮,相应速度档位指示灯开始闪烁,液晶屏上状态显示位置显示[下降],同时实时显示力值和移值.

3、按面板上的停止按键,同时面板上状态指示灯熄灭,相应速度档位指示灯停止闪烁保持常亮,液晶屏状态显示位置显示停止.

速度调整:

按下相应的七个速度按纽中需要选择一个便完成速度的调整,相应的速度指示灯会点亮,注意不要同时按下多个速度按纽.

Debugging and use of waterproof coil tensile testing machine:

Chuck position adjustment:

1.Press the up button on the panel.At the same time, the status indicator on the panel is red, and the corresponding speed gear indicator starts flashing.The status display position on the LCD screen: Ascend, and simultaneously display the force value and shift value in real time. Or the large A limit value of displacement, it will automatically stop, while the LCD screen status and position display full load or limit.

2.Press the down button on the panel, at the same time, the status indicator on the panel is green, the corresponding speed gear indicator starts flashing, the status display position on the LCD screen displays [Descent], and the force value and shift value are displayed in real time.

3.Press the stop button on the panel, at the same time, the status indicator on the panel goes out, the corresponding speed gear indicator stops flashing and stays on, and the LCD status display position display stops.

Speed adjustment:

Press the corresponding seven speed buttons to select one to complete the speed adjustment. The corresponding speed indicator will light up. Be careful not to press multiple speed buttons at the same time.

 

防水卷材试验机使用方法:

**先按下面板上清零按扭,系统会自动进行拉力和位移零位校准,然后按下启动按纽,同时面板上状态指示灯亮红灯,相应速度档位指示灯开始闪烁,液晶屏上显示力值和位置的A大值,如果满足预定的停机条件,系统自动停机,液晶屏状态自动显示位置,断裂,并保持A大力值和位移A大值,等待2s后系统,开始回车,同时面板上状态指示红灯亮,相应速度档位指示灯开始闪烁,回到零位后系统自动停机,面板上状态指示灯熄灭,相应速度档位指示灯停止闪烁保持常亮,液晶屏上状态显示位置显示有效.                                                 按下启动按纽后如人工按下停止按键系统自动停止,同时产生无效数据,并给出相应指示,.在测试过程中如果拉力和位移到达大限制值,系统也自动停机,同时液晶屏状态位置显示满载或限位.

Debugging and use of waterproof coil tensile testing machine:

Chuck position adjustment:

1.Press the up button on the panel.At the same time, the status indicator on the panel is red, and the corresponding speed gear indicator starts flashing.The status display position on the LCD screen: Ascend, and simultaneously display the force value and shift value in real time. Or the large A limit value of displacement, it will automatically stop, while the LCD screen status and position display full load or limit.

2.Press the down button on the panel, at the same time, the status indicator on the panel is green, the corresponding speed gear indicator starts flashing, the status display position on the LCD screen displays [Descent], and the force value and shift value are displayed in real time.

3.Press the stop button on the panel, at the same time, the status indicator on the panel goes out, the corresponding speed gear indicator stops flashing and stays on, and the LCD status display position display stops.

Speed adjustment:

Press the corresponding seven speed buttons to select one to complete the speed adjustment. The corresponding speed indicator will light up. Be careful not to press multiple speed buttons at the same time.

 

防水卷材试验机手动停车和自动停车方式的调整(请注意:切勿轻易调整)

按设置键,液晶屏显示输入密码.密码为22.按2次清零再按2次样本密码位置显示22.输入完毕.按设置键再按下打印键6次显示回车状态.按下样本为手动回车,按下清零键为自动回车,按下设置键退出,调整完毕.注自动回车时可按下样本键否则按停止键后数值不保持.

Adjustment of the manual and automatic stopping methods of the waterproof coil tensile tester (please note: do not adjust easily)

Press the set key, the LCD screen displays the input password. The password is 22. Press twice to clear and then press twice. The sample password position is displayed. 22. Input is complete. Press the set key and then press the print key 6 times to display the carriage return status. Press the sample For manual carriage return, press the zero key for automatic carriage return, press the set button to exit, and the adjustment is completed. Note When the automatic carriage return, the sample button can be pressed, otherwise the value will not be maintained after pressing the stop button.

 

防水卷材拉力试验机系统状态显示位置显示有效,按下面板样本按纽,系统自动存储当前测试数据,样本数加1,如在其它状态下按下样本按纽,液晶屏状态显示均值,系统显示目前测试过程中的全部样品的平均值,如果再次按动按纽样本按纽,液晶屏上状态位置显示浏览.同时开始存储样本由后到前的浏览.浏览完成A个样本后,系统再次显示平均值,再次准备样本由前到后的浏览.按其他强键退出浏览.

The system status display position of the waterproof membrane tensile testing machine is valid. Press the sample button on the panel, the system automatically stores the current test data, and the number of samples is increased by 1.If you press the sample button in other states, the LCD screen displays the average value. Display the average value of all samples in the current test process. If you press the button again, the sample button will display the status on the LCD screen. At the same time, the storage sample will be browsed from back to front. After A sample is browsed, the system will be displayed again. The average value is displayed, and the sample is ready to be browsed from front to back. Press other strong keys to exit the browsing.


防水卷材拉伸试验机,油毡拉力试验机, 砂浆拉力试验机

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

防水卷材拉伸试验机,油毡拉力试验机, 砂浆拉力试验机

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号