上海荣计达仪器科技有限公司

021-61997300 13761118616

累积点滴改进  迈向完美品质

www.rongjida.cn

图片展示
搜索

荣计达QFR-A涂层耐溶剂测定仪

涂层耐溶剂测定仪是**检测仪器,用于测定铝塑复合板及类似底材上涂层的耐溶剂性,在规定的溶剂和条件下擦洗涂层后,目测擦洗处是否有显露底材现象。

  • 型号: QFR-A

  • 产品参数
  • 型号: QFR-A

 

上海荣计达仪器科技有限公司**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。**经营水泥实验仪器、混凝土实验仪器、公路土工实验仪器、干粉砂浆保温砂浆实验仪器、沥青防水材料实验仪器、油漆涂料实验仪器、无损检测等实验仪器。公司产品凭借过硬的质量、完善的售后服务、合理的价格畅销各大院校、检测单位、建材企业、工程建设单位。在消费者当中享有较高的地位和良好的口碑,用户遍布国内近三十个省市、自治区,并远销国外,与用户建立了长期稳定的合作关系。公司实力雄厚,重信用、守合同。有健全的管理制度和完善健全的质量管理体系。并有反应迅速、服务周到的售后服务系统。我们将不懈努力、一如既往以优异的品质为客户服务。

Shanghai Rongjida Instrument Technology Co., Ltd. ** operates cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. ** Operating cement experiment equipment, concrete experiment equipment, highway geotechnical experiment equipment, dry mortar thermal insulation mortar experiment equipment, asphalt waterproof material experiment equipment, paint coating experiment equipment, non-destructive testing and other experimental equipment. Company products rely on excellent quality, perfect after-sales service, reasonable prices sell well in major universities, testing units, building materials enterprises, engineering construction units. It enjoys a high status and a good reputation among consumers, and has customers in nearly 30 provinces, cities, and autonomous regions in China, and has been exported to foreign countries. It has established long-term and stable cooperative relationships with users. The strength of the company, credit and contract compliance. Have a sound management system and a sound quality management system. And has a responsive and thoughtful after-sales service system. We will make unremitting efforts to serve our customers with excellent quality as always.

 

涂层耐溶剂测定仪**检测仪器,用于测定铝塑复合板及类似底材上涂层的耐溶剂性,在规定的溶剂和条件下擦洗涂层后,目测擦洗处是否有显露底材现象。

Coating solvent resistance tester is a testing instrument for measuring the solvent resistance of coatings on aluminum-plastic composite boards and similar substrates. After scrubbing the coating under the specified solvents and conditions, visually inspect whether there is a exposed bottom in the scrubbing area. Material phenomenon.

涂层耐溶剂测定仪技术参数:

★擦洗行程:100mm

★擦洗频率:100次/min

★擦洗力:1000±100g

★擦洗头面积:2cm2

Coating solvent resistance tester technical parameters:

★ Scour stroke: 100mm

★ Scrubbing frequency: 100 times / min

Scrubbing power: 1000 ± 100g

★ Scour head area: 2cm2

 

涂层耐溶剂测定仪使用说明:

★接通电源,打开电源开关,按标准要求设定涂擦次数,按动置数开关,使计数显示设定值,然后按动启动开关,仪器将开始工作,(若打开电源后,有数值显示,请按复位开关)计数显示开始工作,到设定值时,仪器自动停止工作,若需要中途停机,按动暂停开关即停。

★按动复位开关将刷子臂连同部件卸下,取出试样,目测擦洗处是否有显露内层(即是否有露底)现象以三块试样中性能**差着为试验结果。

Instructions for coating solvent resistance tester:

★ Turn on the power, turn on the power switch, set the number of rubbing times according to the standard requirements, press the set switch to make the count display the set value, and then press the start switch, the instrument will start to work (if there is a value after turning on the power Display, please press the reset switch) The counting display starts to work. When the set value is reached, the instrument will automatically stop working. If you need to stop midway, press the pause switch to stop.

★ Press the reset switch to remove the brush arm and its components, remove the sample, and visually inspect the scrubbing area to reveal whether the inner layer (that is, whether there is a bottom) is exposed. The performance of the three samples is the worst.

 

涂层耐溶剂测定仪注意事项:

★仪器在正常工作中,计数器不得随意设定。

★仪器应水平放置后方可作试验。

★仪器使用较长时间后应将仪器上盖部件拆开,向变速箱内注入机油。在两导杠的油孔中亦注入机油,但不应过量。

★试验完毕后,应将剩余溶剂倒出,其余部分擦洗干净,以防生锈。

Note for coating solvent resistance tester:

★ In normal operation of the instrument, the counter must not be set arbitrarily.

★ The instrument should be placed horizontally before testing.

★ After using the instrument for a long time, the upper cover parts of the instrument should be disassembled, and oil should be injected into the gearbox. Oil is also injected into the oil holes of the two guide bars, but it should not be excessive.

★ After the test is completed, the remaining solvent should be poured out, and the rest should be scrubbed to prevent rust.

 


荣计达QFR-A涂层耐溶剂测定仪

长按图片可保存到相册

图片加载中,请稍等 ...
长按图片保存/分享
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

荣计达QFR-A涂层耐溶剂测定仪

立即询盘
询盘

咨询表单:

  • 请输入验证码

咨询产品:


你还没有添加任何产品!

推荐产品

上海荣计达仪器科技有限公司

电话:021-61997300

传真:021-34795918

邮箱:289239104@qq.com

地址:上海市闵行区浦江镇联胜路189号 

邮编:201112 

图片展示

版权所有:上海荣计达仪器科技有限   公司地址:上海市闵行区浦江镇联胜路189号 邮编:201112   沪ICP备11009963号