欢迎访问上海荣计达仪器科技有限公司网站

热线电话:13761118616

图片展示

HQP-200岩石自动切割机

岩石双刀切割机是各类矿石、混凝土等非金属固体进行力学测试的标准样本制作的主要设备。岩石切割机与取芯机、切割机配套工作,即可为您加工出您所需要的高精密的立方体或圆柱体测试样本。

  • 型号: HQP-200

  • 产品参数
  • 型号: HQP-200

一、产品简介:

岩石双刀切割机是各类矿石、混凝土等非金属固体进行力学测试的标准样本制作的主要设备。岩石切割机与取芯机、切割机配套工作,即可为您加工出您所需要的高精密的立方体或圆柱体测试样本。适用于大专院校水利水电、地质矿产、交通、建筑等部门。岩石双刀切割机适用于混凝土切割机,岩石切割机,双刀结构,全密封、低噪音,自动切割且速度可调,可快速进退,自动后退,采用大直径450-800mm金刚石刀片,可同时切割两平行的平面,两平面距离可调。

Product introduction:

Rock double-knife cutting machine is the main equipment for making standard samples of various types of ore, concrete and other non-metal solids for mechanical testing. The rock cutting machine works with coring machine and cutting machine to process the high-precision cube or cylinder test samples you need. Applicable to water conservancy and hydropower, geology and mineral resources, transportation, construction and other departments of colleges and universities. Rock double-knife cutting machine is suitable for concrete cutting machine, rock cutting machine, double-knife structure, fully sealed, low noise, automatic cutting and adjustable speed, fast advance and retreat, automatic retreat, using large diameter 450-800mm diamond blades, can Cutting two parallel planes, the distance between the two planes can be adjusted.


二、技术参数:

★A大可切高度(mm) Φ200mm

★金刚石切刀(mm) Φ600*Φ45*3

★工作形式 单、双刀切割两平面

★主电机 3KW

★切刀线速度  33-55m/s

★工作进度  电控调速

★噪音  ≦80dB

★外形尺寸 长1650*宽880*高1200mm

★重量 750kg

Second, the technical parameters of rock double-knife cutting machine:

★ A large cuttable height (mm) Φ200mm

★ Diamond cutter (mm) Φ600 * Φ45 * 3

★ Working form Single and double knife cutting two planes

★ Main motor 3KW

Cutting knife linear speed 33-55m / s

★ Work progress

Noise ≦ 80dB

★ Dimensions: Length 1650 * width 880 * height 1200mm

★ Weight 750kg


三、操作规程:

★混凝土切割机,岩石切割机安装完毕后,接通控制台的外接电源,检查混凝土切割机,岩石切割机的各传动部分是否灵活,各紧固件是否松动,接通自来水或电泵,做好冷却准备。

★按进刀按钮进给电机工作,根据样块硬软调整控制仪表的转速,并沿工作台执行前进,切割完毕自动退刀。

★装上岩试样或被切割的物品,装夹时,应注意选择理想的夹持点,防止虚夹和假夹现象。以免在切割的进程中,因夹持件窜动而损坏刀片和夹持件。

★夹持步骤:先将岩样8平放在工作台上,然后将顶压夹具10沿T槽插进,上下移动顶杆螺栓,使之在选择可靠的夹持点时落入槽内,使顶杆13固定,然后再旋转顶杆,使移动夹具体的尾部与工作台形成死角,顶杆即可将岩样顶住。(具体见使用说明书)

★根据实验时,在A后进行盛开切割时,需配备一块厚度为6-10毫米,宽度为4-5毫米,长度适中的木块,垫放在长压板下面,这样既可以消除由于切割到A后岩石突然开裂,使岩样有埸角现象。

Three, rock double-knife cutting machine operating procedures

★ After the concrete cutting machine and rock cutting machine are installed, connect the external power supply of the console, check whether the transmission parts of the concrete cutting machine and rock cutting machine are flexible, whether the fasteners are loose, connect the tap water or electric pump, and do Ready to cool.

★ Press the feed button to feed the motor to work, adjust the speed of the control instrument according to the hardness of the sample block, and execute the forward movement along the workbench. After the cutting, the tool will automatically retract.

★ When loading rock samples or cut items, care should be taken to select the ideal clamping point to prevent false clamping and false clamping. So as not to damage the blade and the clamping member due to the movement of the clamping member during the cutting process.

★ Clamping step: First place the rock sample 8 on the workbench, then insert the jacking jig 10 along the T slot, and move the jack bolt up and down so that it will fall into the slot when a reliable clamping point is selected. The ejector pin 13 is fixed, and then the ejector pin is rotated, so that the concrete tail of the moving clamp forms a dead angle with the worktable, and the ejector pin can bear the rock sample. (See the instruction manual for details)

★ According to the experiment, when cutting in full after A, a wooden block with a thickness of 6-10 mm, a width of 4-5 mm, and a moderate length needs to be equipped with a pad under the long pressing plate, which can eliminate the After A, the rock suddenly cracked, making the rock sample horny.


四、注意事项:

★切刀运动到终端时,后退需等待刀片全部脱离工作,方可停止主机运转以及冷却液,然后打开封闭门。

★金刚石刀片在装夹岩石时避免撞击,以免刀片变形,影响切削质量。

★注意冷却液的流量是否充足,以防得不到充分冷却,会使刀片磨损加剧。

Fourth, the precautions for rock double-knife cutting machine

★ When the cutter moves to the terminal, you need to wait for all the blades to retreat before stopping the main engine and the coolant, and then open the closed door.

★ Don't impact the diamond blade when clamping the rock, so as not to deform the blade and affect the cutting quality.

★ Pay attention to whether the flow of coolant is sufficient to prevent insufficient cooling, which will increase blade wear.


五、维护与保养:

★工作完毕后,应清洗工作台面上的岩渣,擦净刀片与工作台面上的水渍,加注进刀拖板与刀轴、导轨的润滑油。

★整机使用后,若在一定时间内暂不使用,应将刀片和夹具部分一些易生锈的地方,涂一层牛油,以防锈蚀。

Fifth, the maintenance and maintenance of rock double-knife cutting machine

★ After the work is completed, the slag on the work surface should be cleaned, the water stain on the blade and the work surface should be cleaned, and the lubricating oil into the knife carriage, knife shaft and guide rail should be filled.

★ After using the whole machine, if it is not used for a certain period of time, the blades and fixtures should be rusted and coated with a layer of butter to prevent corrosion.


HQP-200岩石自动切割机
岩石双刀切割机是各类矿石、混凝土等非金属固体进行力学测试的标准样本制作的主要设备。岩石切割机与取芯机、切割机配套工作,即可为您加工出您所需要的高精密的立方体或圆柱体测试样本。
长按识别二维码查看详情
长按图片保存/分享

HQP-200岩石自动切割机

询盘

咨询表单:

  • 请输入验证码

咨询内容:


你还没有添加任何产品

加入成功

扫一扫关注我们

Copyright @ 2018 上海荣计达仪器科技有限公司.All Rights Reserved   沪ICP备11009963号-4     

上海市闵行区浦江镇沈杜公路3259号                                                             网站地图

Copyright @ VillaGrandis All Rights Reserved某某某有限公司版权所有        

ICP备案号180006020号-3

 

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了